DEFINSIGHT SOFTWARE - V1.2.3.21 Latest

1. Fixed the issue where the tracker may not recognize the Markers in some cases.
2. Fixed the issue where the exposure of Nimble Gen2 cannot reach 5.0 ms or above in Only Tracker Mode.
3. Optimized the filtering effect of noise points during completion in LaserPatch and Efficiency First mode.

Probes used in DefinSight will no longer work in TViewer.

RECOMMENDED PC SPECS / COMPATIBLE LAPTOPS

FIRMWARE - V1.1.7.2 Latest

1. Latest firmware for DefinSight. Please update for the best user experience and compatibility with new software features.
2.  Requires firmware update tool v1.0.0.48

If you are currently on firmware earlier than 1.1.5.9 you will need to update to 1.1.5.9 first and then proceed with 1.1.7.2.
Use below instructions to update to 1.1.5.9. first, then repeat to update to 1.1.7.2.
Download 1.1.5.9. here.

Update Instructions (Please watch video first):

1. Download and Install Firmware Update Tool.

2. Connect scanner and tracker via cables.

3. Launch update tool.

4. Wait for scanner and tracker to initialize and display Serial number and current firmware version in upper area.

5. Click "Select upgrade package" button.

6. Select the downloaded firmware file and click "Open".

7.  Start update by clicking on the "Start to upgrade" button.

Power cycle the scanner and tracker once the firmware has finished updating.

  FIRMWARE update tool - V1.0.0.48 Latest

1. Required for latest TrackScan Sharp-S firmware.
   
   

TVIEWER SOFTWARE - V4.2.3.2

1. 4.2.+ added medium and large depth of field scanning modes  

Requires firmware V1.0.7.4
Please update firmware first.

  FIRMWARE update tool - V1.0.0.46 Latest

1. Required for 1.0.7.4  TrackScan Sharp-S firmware.
   
   

FIRMWARE - V1.0.7.4 

1. For TViewer  V4.2.3.2
2.  Requires firmware update tool v1.0.0.46

Update Instructions (Please watch video first):

1. Download and Install Firmware Update Tool.

2. Connect scanner and tracker via cables.

3. Launch update tool.

4. Wait for scanner and tracker to initialize and display Serial number and current firmware version in upper area.

5. Click "Select upgrade package" button.

6. Select the downloaded firmware file and click "Open".

7.  Start update by clicking on the "Start to upgrade" button.

Power cycle the scanner and tracker once the firmware has finished updating.